ud_476-20220305T1558 Delayed Mode Science Profiles

Summary:
Deployment of Slocum glider to perform surveys of acoustically tagged species in the Mid Atlantic Bight. Secondary mission is to comparison test experimental animal CTD tag with glider CTD measurements. The glider provides CTD, chlorophyll a concentrations, CDOM concentrations, and Dissolved Oxygen measurements. The acoustic and experimental tag measurements are logged externally to the glider science bay and are not available in this dataset. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum glider ud_476)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcd (Wetlabs FLBBCD Puck)
instrument_optode (Oxygen Optode)
instrument_vemco (Vemco VR2C Cabled Receiver)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
beta_700nm_reference (Beta 700nm Reference at 117 degrees, m-1 sr-1)
beta_700nm_signal (Beta 700nm Signal at 117 degrees, m-1 sr-1)
cdom (ppb)
cdom_reference (nodim)
cdom_signal (nodim)
chlorophyll_a (ug L-1)
chlorophyll_a_qartod_gross_range_test (Gross Range Test Quality Flag)
chlorophyll_a_qartod_summary_flag (QARTOD Summary Quality Flag)
... (80 more variables)


ud_476-20220412T1700 Delayed Mode Raw Time Series

Summary:
Deployment of Slocum glider in the Mid Atlantic Bight. Secondary mission is comparison test light based geolocation tag with glider PAR and ARGOS measurements. The glider provides CTD, chlorophyll a concentrations, CDOM concentrations, PAR, and Dissolved Oxygen measurements. The tag measurements are logged externally to the glider science bay and are not available in this dataset. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum glider ud_476)
instrument_bsipar (Photosynthetically Active Radiation (PAR) Sensor)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbslc (ECO Triplet Puck)
instrument_minipat (MiniPAT)
instrument_optode (Oxygen Optode)
c_bsipar_num_fields_to_send (nodim)
c_bsipar_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbb_num_fields_to_send (nodim)
c_flbb_on (sec)
c_heading (rad)
c_oxy4_num_fields_to_send (nodim)
c_oxy4_on (sec)
c_pitch (rad)
c_roll (rad)
... (79 more variables)


ud_476-20220412T1700 Delayed Mode Science Profiles

Summary:
Deployment of Slocum glider in the Mid Atlantic Bight. Secondary mission is comparison test light based geolocation tag with glider PAR and ARGOS measurements. The glider provides CTD, chlorophyll a concentrations, CDOM concentrations, PAR, and Dissolved Oxygen measurements. The tag measurements are logged externally to the glider science bay and are not available in this dataset. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum glider ud_476)
instrument_bsipar (Photosynthetically Active Radiation (PAR) Sensor)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbslc (ECO Triplet Puck)
instrument_minipat (MiniPAT)
instrument_optode (Oxygen Optode)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
beta_700nm_reference (Beta 700nm Reference at 117 degrees, m-1 sr-1)
beta_700nm_signal (Beta 700nm Signal at 117 degrees, m-1 sr-1)
bsipar_timestamp (sci_bsipar_timestamp, seconds since 1970-01-01T00:00:00Z)
chlorophyll_a (ug L-1)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
... (82 more variables)


ud_476-20230113T1454 Real Time Raw Time Series

Summary:
The goal of this project is to characterize the dynamics of a buoyant ocean front formed by meltwater along the Antarctic Peninsula.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum glider ud_476)
instrument_aquadopp (Nortek Aquadopp)
instrument_bsipar (Photosynthetically Active Radiation (PAR) Sensor)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (94 more variables)


ud_476-20230113T1454 Real Time Science Profiles

Summary:
The goal of this project is to characterize the dynamics of a buoyant ocean front formed by meltwater along the Antarctic Peninsula.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum glider ud_476)
instrument_aquadopp (Nortek Aquadopp)
instrument_bsipar (Photosynthetically Active Radiation (PAR) Sensor)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
bsipar_timestamp (sci_bsipar_timestamp, seconds since 1970-01-01T00:00:00Z)
chlorophyll_a (ug L-1)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
... (50 more variables)


ud_476-20230822T2018 Real Time Raw Time Series

Summary:
This glider is being deployed with few integrated sensors (only CTD and PAR) in order to conserve battery. The deployment is expected to last three to four weeks as it travels along the edge of the Gulf Stream from North Carolina to Rhode Island, and will be used to validate the accuracy of geolocation algorithms that are currently in use and under development.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ud_476 Slocum G2)
instrument_bsipar (Biospherical QSP-2155 Underwater PAR Sensor)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_minipat (Wildlife Computers MiniPAT pop-up archival transmitting tag)
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_heading (rad)
c_science_send_all (bool)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
f_fin_offset (rad)
f_ocean_pressure_max (volts)
... (83 more variables)


ud_476-20230822T2018 Real Time Science Profiles

Summary:
This glider is being deployed with few integrated sensors (only CTD and PAR) in order to conserve battery. The deployment is expected to last three to four weeks as it travels along the edge of the Gulf Stream from North Carolina to Rhode Island, and will be used to validate the accuracy of geolocation algorithms that are currently in use and under development.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (ud_476 Slocum G2)
instrument_bsipar (Biospherical QSP-2155 Underwater PAR Sensor)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_minipat (Wildlife Computers MiniPAT pop-up archival transmitting tag)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
ctd41cp_timestamp (sci_ctd41cp_timestamp, seconds since 1970-01-01T00:00:00Z)
density (kg m-3)
... (43 more variables)


ud_476-20240709T1216 Real Time Raw Time Series

Summary:
This project supports the deployment and real-time data delivery of autonomous underwater gliders in the coastal ocean to better resolve and understand essential ocean features and processes that contribute to hurricane intensification or weakening prior to making landfall. This includes a partnership between the Integrated Ocean Observing System (IOOS) regional associations such as MARACOOS, SECOORA, CariCOOS and institutions including the University of Puerto Rico, University of the Virgin Islands, Skidaway Institute of Oceanography, University of Delaware, and Rutgers University. The goal of the project is to provide real-time data for ocean model validation and assimilation throughout hurricane season. This project is supported by the Disaster Recovery Act. This glider will sample a triangle pattern from the mouth of the Delaware Bay out toward the shelf-break and will additionally be used to collect geolocation data to train an animal tag geolocation algorithm.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ud_476 Slocum G2)
instrument_bsipar (Biospherical QSP-2155 Underwater PAR Sensor)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_minipat (Wildlife Computers MiniPAT pop-up archival transmitting tag)
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_heading (rad)
c_science_send_all (bool)
c_weight_drop (bool)
... (91 more variables)


ud_476-20240709T1216 Real Time Science Profiles

Summary:
This project supports the deployment and real-time data delivery of autonomous underwater gliders in the coastal ocean to better resolve and understand essential ocean features and processes that contribute to hurricane intensification or weakening prior to making landfall. This includes a partnership between the Integrated Ocean Observing System (IOOS) regional associations such as MARACOOS, SECOORA, CariCOOS and institutions including the University of Puerto Rico, University of the Virgin Islands, Skidaway Institute of Oceanography, University of Delaware, and Rutgers University. The goal of the project is to provide real-time data for ocean model validation and assimilation throughout hurricane season. This project is supported by the Disaster Recovery Act. This glider will sample a triangle pattern from the mouth of the Delaware Bay out toward the shelf-break and will additionally be used to collect geolocation data to train an animal tag geolocation algorithm.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (ud_476 Slocum G2)
instrument_bsipar (Biospherical QSP-2155 Underwater PAR Sensor)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_minipat (Wildlife Computers MiniPAT pop-up archival transmitting tag)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
... (50 more variables)


ud_orris-20240907T1638 Real Time Raw Time Series

Summary:
This glider is being deployed in the Santa Barbara Channel to provide in-situ optical and acoustic data to be matched with PACE satellite and airborne HSRL-2 Lidar system data as part of the PACE-PAX experiment. Sampling will be coordinated with PACE overpasses, the ER-2 overflights, and the NOAA RV Shearwater.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ud_orris Slocum G3S)
instrument_ek80 (Simrad EK80 echo sounder)
instrument_flbbbbv1 (flbbbbV1)
instrument_ocr504i (Satlantic {Sea-Bird} OCR-504 multispectral radiometer)
instrument_ocr504r (Satlantic {Sea-Bird} OCR-504 multispectral radiometer)
instrument_rbrctd (RBR Legato3 CTD)
c_ballast_pumped (cc)
c_battpos (in)
c_climb_bpump (X)
c_de_oil_vol (cc)
c_dive_bpump (X)
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_thruster_on (%)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (61 more variables)


ud_orris-20240907T1638 Real Time Science Profiles

Summary:
This glider is being deployed in the Santa Barbara Channel to provide in-situ optical and acoustic data to be matched with PACE satellite and airborne HSRL-2 Lidar system data as part of the PACE-PAX experiment. Sampling will be coordinated with PACE overpasses, the ER-2 overflights, and the NOAA RV Shearwater.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (ud_orris Slocum G3S)
instrument_ek80 (Simrad EK80 echo sounder)
instrument_flbbbbv1 (flbbbbV1)
instrument_ocr504i (Satlantic {Sea-Bird} OCR-504 multispectral radiometer)
instrument_ocr504r (Satlantic {Sea-Bird} OCR-504 multispectral radiometer)
instrument_rbrctd (RBR Legato3 CTD)
chlorophyll_a (sci_flbbbbv1_fl_scaled, ug/l)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
... (45 more variables)


ud_orris-20250905T1810 Real Time Raw Time Series

Summary:
This glider is being deployed in Bermuda along the BATS transect to collect optical and acoustic data for use with concurrent cruise and lidar flight data.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ud_orris Slocum G3S)
instrument_ek80 (Simrad EK80 echo sounder)
instrument_flbbbbv1 (flbbbbV1)
instrument_ocr504i (Satlantic {Sea-Bird} OCR-504 multispectral radiometer)
instrument_ocr504r (Satlantic {Sea-Bird} OCR-504 multispectral radiometer)
instrument_rbrctd (RBR Legato3 CTD)
c_ballast_pumped (cc)
c_battpos (in)
c_climb_bpump (X)
c_de_oil_vol (cc)
c_dive_bpump (X)
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_thruster_on (%)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_argos_is_xmitting (bool)
... (53 more variables)


ud_orris-20250905T1810 Real Time Science Profiles

Summary:
This glider is being deployed in Bermuda along the BATS transect to collect optical and acoustic data for use with concurrent cruise and lidar flight data.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (ud_orris Slocum G3S)
instrument_ek80 (Simrad EK80 echo sounder)
instrument_flbbbbv1 (flbbbbV1)
instrument_ocr504i (Satlantic {Sea-Bird} OCR-504 multispectral radiometer)
instrument_ocr504r (Satlantic {Sea-Bird} OCR-504 multispectral radiometer)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
density_qartod_climatology_test (Climatology Test Quality Flag)
... (40 more variables)


um_240-20211014T1758 Real Time Raw Time Series

Summary:
This project is conducting a deployment of a passive acoustic glider in the eastern Gulf of Maine to monitor and survey calls of Sei, Fin, Humpback and Right whales, and physical oceanographic conditions.  This approximately 21-to-30 day deployment begins in the Eastern Maine Coastal Current (EMCC), and proceeds to the UMOOS Buoy I, Jordan Basin, and Buoy M.  The glider will then cruise NE toward the Grand Manan banks and then SW back to Buoy M, and finally patrolling the LMA1 restricted region that Right whales traditionally visit in the fall and where there is evidence that the area is a mating ground. The glider uses the digital acoustic monitoring (DMON) instrument and the low-frequency detection and classification software (LFDCS).  The glider uses an RBR CTD, a WETLabs ECO puck configured with chlorophyll a fluorescence, CDOM, Turbidity, and an Aanderaa optode for measuring dissolved oxygen.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Teledyne Webb Research Slocum G2 glider)
instrument_bbfl2slo (ECO Triplet Puck)
instrument_ctd_rbr (RBR CTD)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (Oxygen Optode)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
... (99 more variables)


um_240-20211014T1758 Real Time Science Profiles

Summary:
This project is conducting a deployment of a passive acoustic glider in the eastern Gulf of Maine to monitor and survey calls of Sei, Fin, Humpback and Right whales, and physical oceanographic conditions.  This approximately 21-to-30 day deployment begins in the Eastern Maine Coastal Current (EMCC), and proceeds to the UMOOS Buoy I, Jordan Basin, and Buoy M.  The glider will then cruise NE toward the Grand Manan banks and then SW back to Buoy M, and finally patrolling the LMA1 restricted region that Right whales traditionally visit in the fall and where there is evidence that the area is a mating ground. The glider uses the digital acoustic monitoring (DMON) instrument and the low-frequency detection and classification software (LFDCS).  The glider uses an RBR CTD, a WETLabs ECO puck configured with chlorophyll a fluorescence, CDOM, Turbidity, and an Aanderaa optode for measuring dissolved oxygen.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Teledyne Webb Research Slocum G2 glider)
instrument_bbfl2slo (ECO Triplet Puck)
instrument_ctd_rbr (RBR CTD)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (Oxygen Optode)
beta_880nm (Beta 880nm at 117 degrees, m-1 sr-1)
cdom (ppb)
chlorophyll_a (ug L-1)
conductivity (Raw Conductivity, S m-1)
... (21 more variables)


um_240-20211205T1918 Real Time Raw Time Series

Summary:
This project is conducting a deployment of a passive acoustic glider in the eastern Gulf of Maine to monitor and survey calls of Sei, Fin, Humpback and Right whales, and physical oceanographic conditions.  This approximately 21-to-30 day deployment begins in the Eastern Maine Coastal Current (EMCC), and proceeds to the UMOOS Buoy I, Jordan Basin, and Buoy M.  The glider will then cruise SW toward the LMA1 restricted region that Right whales traditionally visit in the fall and where there is evidence that the area is a mating ground. The glider uses the digital acoustic monitoring (DMON) instrument and the low-frequency detection and classification software (LFDCS).  The glider uses an RBR CTD, a WETLabs ECO puck configured with chlorophyll a fluorescence, CDOM, Turbidity, and an Aanderaa optode for measuring dissolved oxygen.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Teledyne Webb Research Slocum G2 glider)
instrument_bbfl2slo (ECO Triplet Puck)
instrument_ctd_rbr (RBR CTD)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (Oxygen Optode)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
... (98 more variables)


um_240-20211205T1918 Real Time Science Profiles

Summary:
This project is conducting a deployment of a passive acoustic glider in the eastern Gulf of Maine to monitor and survey calls of Sei, Fin, Humpback and Right whales, and physical oceanographic conditions.  This approximately 21-to-30 day deployment begins in the Eastern Maine Coastal Current (EMCC), and proceeds to the UMOOS Buoy I, Jordan Basin, and Buoy M.  The glider will then cruise SW toward the LMA1 restricted region that Right whales traditionally visit in the fall and where there is evidence that the area is a mating ground. The glider uses the digital acoustic monitoring (DMON) instrument and the low-frequency detection and classification software (LFDCS).  The glider uses an RBR CTD, a WETLabs ECO puck configured with chlorophyll a fluorescence, CDOM, Turbidity, and an Aanderaa optode for measuring dissolved oxygen.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Teledyne Webb Research Slocum G2 glider)
instrument_bbfl2slo (ECO Triplet Puck)
instrument_ctd_rbr (RBR CTD)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (Oxygen Optode)
beta_880nm (Beta 880nm at 117 degrees, m-1 sr-1)
cdom (ppb)
chlorophyll_a (ug L-1)
conductivity (Raw Conductivity, S m-1)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (20 more variables)


um_242-20210630T1916 Delayed Mode Science Profiles

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Mid-Atlantic Bight. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The dataset contains CTD, chlorphyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment. Delayed mode dataset

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Teledyne Webb Research Slocum G2 glider)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_pH (Deep ISFET Ocean pH Sensor)
conductivity (Raw Conductivity, S m-1)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
ctd41cp_timestamp (sci_ctd41cp_timestamp, seconds since 1970-01-01T00:00:00Z)
density (kg m-3)
flntu_timestamp (sci_flntu_timestamp, seconds since 1970-01-01T00:00:00Z)
glider_altitude (Glider Altitude Above the Seafloor, m)
... (42 more variables)


um_242-20210630T1916 Real Time Raw Time Series

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Mid-Atlantic Bight. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. This approximately 21 to 30 day deployment out of Tuckerton, NJ will run a cross-shelf transect (along E line) to an offshore waypoint north of Carteret Canyon, then transect SSW to Wilmington Canyon, then NW back to Tuckerton, NJ as the battery pack allows. This glider track will cover Atlantic sea scallop and Atlantic surfclam habitats in the southern MAB. The real-time dataset contains CTD, chlorphyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Teledyne Webb Research Slocum G2 glider)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_pH (Deep ISFET Ocean pH Sensor)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
... (104 more variables)


um_242-20211105T1601 Delayed Mode Science Profiles

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Mid-Atlantic Bight. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Teledyne Webb Research Slocum G2 glider)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_pH (Deep ISFET Ocean pH Sensor)
conductivity (Raw Conductivity, S m-1)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
ctd41cp_timestamp (sci_ctd41cp_timestamp, seconds since 1970-01-01T00:00:00Z)
density (kg m-3)
flntu_timestamp (sci_flntu_timestamp, seconds since 1970-01-01T00:00:00Z)
glider_altitude (Glider Altitude Above the Seafloor, m)
... (42 more variables)


um_242-20211105T1601 Real Time Raw Time Series

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Mid-Atlantic Bight. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Teledyne Webb Research Slocum G2 glider)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_pH (Deep ISFET Ocean pH Sensor)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
... (100 more variables)


um_242-20220513T1603 Real Time Raw Time Series

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Mid-Atlantic Bight. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider um_242)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_pH (Deep ISFET Ocean pH Sensor)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
... (100 more variables)


um_242-20220513T1603 Real Time Science Profiles

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Mid-Atlantic Bight. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum Glider um_242)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_pH (Deep ISFET Ocean pH Sensor)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (52 more variables)


um_242-20220903T1654 Real Time Raw Time Series


um_242-20220903T1654 Real Time Science Profiles

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Mid-Atlantic Bight. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum Glider um_242)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_pH (Deep ISFET Ocean pH Sensor)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (58 more variables)


um_242-20221205T1652 Real Time Raw Time Series


um_242-20221205T1652 Real Time Science Profiles

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Mid-Atlantic Bight. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum Glider um_242)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_pH (Deep ISFET Ocean pH Sensor)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (59 more variables)


um_242-20230803T1952 Real Time Raw Time Series

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Gulf of Maine. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (um_242 Slocum G2)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_optode (AA Optode 5014W)
instrument_pH (Deep ISFET Glider-based pH Sensor)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
... (100 more variables)


um_242-20230803T1952 Real Time Science Profiles

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Gulf of Maine. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (um_242 Slocum G2)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_optode (AA Optode 5014W)
instrument_pH (Deep ISFET Glider-based pH Sensor)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (59 more variables)


um_242-20231109T1440 Real Time Raw Time Series


um_242-20231109T1440 Real Time Science Profiles

Summary:
This project is conducting seasonal deployments to investigate carbonate chemistry and monitor ocean acidification in the Gulf of Maine. The glider used for the automated observation includes an integrated deep rated version of the Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor. The pH sensor unit is complemented with existing glider sensors including a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, and an Aanderaa Optode for measuring dissolved oxygen. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. Dissolved oxygen and pH data will be processed post-deployment.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (um_242 Slocum G2)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_optode (AA Optode 5014W)
instrument_pH (Deep ISFET Glider-based pH Sensor)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (65 more variables)


unit_1190-20241218T1433 Delayed Mode Raw Time Series

Summary:
This project is using a JASCO OceanObserver Snout hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind and Sunrise Wind offshore wind lease areas during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD and a VEMCO receiver. This is the second of four sequential deployments planned to monitor the wind lease area for five months during cod spawning season, November through March. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (unit_1190 Slocum G3S)
instrument_hydrophone (JASCO OceanObserver-Snout acoustic monitoring system)
instrument_rbrctd (RBR Legato3 CTD)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_appear_to_be_at_surface (bool)
m_coulomb_amphr (amp-hrs)
... (36 more variables)


unit_1190-20241218T1433 Delayed Mode Science Profiles

Summary:
This project is using a JASCO OceanObserver Snout hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind and Sunrise Wind offshore wind lease areas during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD and a VEMCO receiver. This is the second of four sequential deployments planned to monitor the wind lease area for five months during cod spawning season, November through March. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (unit_1190 Slocum G3S)
instrument_hydrophone (JASCO OceanObserver-Snout acoustic monitoring system)
instrument_rbrctd (RBR Legato3 CTD)
instrument_vmt (Vemco Mobile Transceiver (VMT))
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
... (43 more variables)


unit_1190-20250224T1405 Delayed Mode Raw Time Series

Summary:
This project is using a JASCO OceanObserver Snout hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind and Sunrise Wind offshore wind lease areas during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD and a VEMCO receiver. This is the fourth of four sequential deployments planned to monitor the wind lease area for five months during cod spawning season, November through March. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (unit_1190 Slocum G3S)
instrument_hydrophone (JASCO OceanObserver-Snout acoustic monitoring system)
instrument_rbrctd (RBR Legato3 CTD)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_appear_to_be_at_surface (bool)
m_ballast_pumped (cc)
... (38 more variables)


unit_1190-20250224T1405 Delayed Mode Science Profiles

Summary:
This project is using a JASCO OceanObserver Snout hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind and Sunrise Wind offshore wind lease areas during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD and a VEMCO receiver. This is the fourth of four sequential deployments planned to monitor the wind lease area for five months during cod spawning season, November through March. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (unit_1190 Slocum G3S)
instrument_hydrophone (JASCO OceanObserver-Snout acoustic monitoring system)
instrument_rbrctd (RBR Legato3 CTD)
instrument_vmt (Vemco Mobile Transceiver (VMT))
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
... (43 more variables)


unit_1190-20250224T1405 Real Time Raw Time Series

Summary:
This project is using a JASCO OceanObserver Snout hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind and Sunrise Wind offshore wind lease areas during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD and a VEMCO receiver. This is the fourth of four sequential deployments planned to monitor the wind lease area for five months during cod spawning season, November through March.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (unit_1190 Slocum G3S)
instrument_hydrophone (JASCO OceanObserver-Snout acoustic monitoring system)
instrument_rbrctd (RBR Legato3 CTD)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
f_fin_offset (rad)
... (50 more variables)


unit_1190-20250224T1405 Real Time Science Profiles

Summary:
This project is using a JASCO OceanObserver Snout hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind and Sunrise Wind offshore wind lease areas during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD and a VEMCO receiver. This is the fourth of four sequential deployments planned to monitor the wind lease area for five months during cod spawning season, November through March.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (unit_1190 Slocum G3S)
instrument_hydrophone (JASCO OceanObserver-Snout acoustic monitoring system)
instrument_rbrctd (RBR Legato3 CTD)
instrument_vmt (Vemco Mobile Transceiver (VMT))
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
... (37 more variables)


unit_191-20150105T1443 Delayed Mode Science Profiles

Summary:
The purpose of this glider mission is to perform along canyon transects of Palmer Deep within the operating CODAR fields off of Anvers Island.  The glider performed 20km Northeast to Southeast transects over Palmer Canyon. This multi-platform field study will investigate the impact of coastal physical processes (e.g. tides, currents, upwelling events, sea-ice) on Adelie penguin foraging ecology in the vicinity of Palmer Deep, off Anvers Island on the western side of the Antarctic Peninsula. Guided by real-time surface convergence and divergences based on remotely sensed surface current maps derived from a coastal network of High Frequency Radars (HFRs), a multidisciplinary research team will adaptively sample the distribution of phytoplankton and zooplankton, which influence Adelie penguin foraging ecology, to understand how local oceanographic processes structure the ecosystem.  The deployment lasted 52 days. This delayed-mode data set contains temperature, salinity, density, chlorophyll, CDOM, and beta700nm measurements.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (unit_191 Slocum G2)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslk (WETLabs ECO FLBBCD-SLK)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
beta_700nm_reference (Beta 700nm Reference at 117 degrees, m-1 sr-1)
beta_700nm_signal (Beta 700nm Signal at 117 degrees, m-1 sr-1)
cdom (ppb)
cdom_reference (nodim)
... (27 more variables)


unit_308-20220826T2012 Real Time Raw Time Series

Summary:
Deployment of an autonomous glider in the Gulf of Mexico to perform physical and optical surveys to characterize the interaction of the Loop Current with the Gulf of Mexico shelf slope interface. The glider was deployed south of Houston and will transect southeast towards the loop current. This real-time data set contains CTD, optical backscatter, colored dissolved organic material and chlorophyll a profiles. The data set will be pushed to the United States IOOS Glider Data Assembly Center, where it will be harvested by the National Data Buoy Center and released on the Global Telecommunication System for real-time and hindcast ocean and hurricane modelling efforts.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider unit_308)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslk (ECO Triplet Puck)
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
... (92 more variables)


unit_308-20220826T2012 Real Time Science Profiles

Summary:
Deployment of an autonomous glider in the Gulf of Mexico to perform physical and optical surveys to characterize the interaction of the Loop Current with the Gulf of Mexico shelf slope interface. The glider was deployed south of Houston and will transect southeast towards the loop current. This real-time data set contains CTD, optical backscatter, colored dissolved organic material and chlorophyll a profiles. The data set will be pushed to the United States IOOS Glider Data Assembly Center, where it will be harvested by the National Data Buoy Center and released on the Global Telecommunication System for real-time and hindcast ocean and hurricane modelling efforts.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum Glider unit_308)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslk (ECO Triplet Puck)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
cdom (ppb)
chlorophyll_a (ug L-1)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (43 more variables)


unit_507-20200109T1549 Delayed Mode Science Profiles

Summary:
The short surface ocean residence times of 1-2 days over Palmer Deep is in conflict with the prevailing hypotheses that local growth support phytoplankton at the base of the food web in these biological hotspots.  Instead, the implication is that horizontal dynamics are likely more important to maintaining these biological hotspots than local upwelling. However, coincident measures of phytoplankton, prey fields, and predator locations in their advective context have not been made to establish the ecological importance of horizontal flow.  In this project, we will simultaneously sample across the entire food web from the phytoplankton and prey fields to the top predators to understand the ocean features that support life in these polar systems.  For the first time in this region, we will integrate these glider deployed sensors with moored, remote sensed and small boat platforms to simultaneously map phytoplankton blooms, krill aggregations, and top predator foraging relative to dynamic ocean features. This dataset contains temperature, salinity, chlorophyll_a, CDOM, beta_700nm and oxygen profiles. This is a delayed mode dataset created from the high resolution files downloaded after the glider was recovered.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum Glider unit_507)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_echosounder (Echosounder)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (31 more variables)

University of Alaska Fairbanks,Rutgers University,Unviersity of Delaware


unit_507-20200109T1549 Real Time Raw Time Series

Summary:
The short surface ocean residence times of 1-2 days over Palmer Deep is in conflict with the prevailing hypotheses that local growth support phytoplankton at the base of the food web in these biological hotspots.  Instead, the implication is that horizontal dynamics are likely more important to maintaining these biological hotspots than local upwelling. However, coincident measures of phytoplankton, prey fields, and predator locations in their advective context have not been made to establish the ecological importance of horizontal flow.  In this project, we will simultaneously sample across the entire food web from the phytoplankton and prey fields to the top predators to understand the ocean features that support life in these polar systems.  For the first time in this region, we will integrate these glider deployed sensors with moored, remote sensed and small boat platforms to simultaneously map phytoplankton blooms, krill aggregations, and top predator foraging relative to dynamic ocean features. This real-time low-resolution dataset contains temperature, salinity, chlorophyll_a, CDOM, beta_700nm and oxygen profiles.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider unit_507)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_echosounder (Echosounder)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
... (100 more variables)


unit_648-20230324T1507 Delayed Mode Raw Time Series

Summary:
This glider mission is one of a series of MARACOOS surveys of shelf hydrography over the northern mid-Atlantic Bight. The glider will survey the shelf in a zig-zag pattern starting in Rhode Island Sound south of the Narragansett Bay mouth and ending off the New Jersey coast at Tuckerton. In addition to the standard payload CTD, the glider carries an oxygen optode and a SUNA-V2 nitrate sensor. The mission will provide novel observations of the spatial variability of dissolved nitrate, an important phytoplankton nutrient, during the spring bloom period. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider unit_648)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_optode (Oxygen Optode)
instrument_suna (SUNA Nitrate Sensor)
c_fin (rad)
c_heading (rad)
c_oxy4_num_fields_to_send (nodim)
c_oxy4_on (sec)
c_pitch (rad)
c_roll (rad)
c_suna_num_fields_to_send (nodim)
c_suna_on (sec)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
... (57 more variables)

Graduate School of Oceanography, University of Rhode Island


unit_648-20230324T1507 Delayed Mode Science Profiles

Summary:
This glider mission is one of a series of MARACOOS surveys of shelf hydrography over the northern mid-Atlantic Bight. The glider will survey the shelf in a zig-zag pattern starting in Rhode Island Sound south of the Narragansett Bay mouth and ending off the New Jersey coast at Tuckerton. In addition to the standard payload CTD, the glider carries an oxygen optode and a SUNA-V2 nitrate sensor. The mission will provide novel observations of the spatial variability of dissolved nitrate, an important phytoplankton nutrient, during the spring bloom period. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum Glider unit_648)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_optode (Oxygen Optode)
instrument_suna (SUNA Nitrate Sensor)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (71 more variables)


usf-murphy-20221104T1001 Delayed Mode Raw Time Series

Summary:
The Predictions of AcousticS with Smart Experimental Networks of GlidERS (PASSENGERS) project is a partnership between universities and the Naval Research Laboratory to improve the capability of data-assimilative ocean models to predict acoustic propagation in dynamic oceanography environments. It includes the deployment of teams of gliders in small (10 km) spatial footprints with integrated passive acoustics focused on mapping the physical and acoustic environment in the dynamic region of the Atlantis II Seamounts. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider usf-murphy)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_hydrophone (Loggerhead LS1 Hydrophone)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_appear_to_be_at_surface (bool)
m_coulomb_amphr (amp-hrs)
m_depth (Depth, m)
m_fin (rad)
... (30 more variables)


usf-murphy-20221104T1001 Delayed Mode Science Profiles

Summary:
The Predictions of AcousticS with Smart Experimental Networks of GlidERS (PASSENGERS) project is a partnership between universities and the Naval Research Laboratory to improve the capability of data-assimilative ocean models to predict acoustic propagation in dynamic oceanography environments. It includes the deployment of teams of gliders in small (10 km) spatial footprints with integrated passive acoustics focused on mapping the physical and acoustic environment in the dynamic region of the Atlantis II Seamounts. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (Slocum Glider usf-murphy)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_hydrophone (Loggerhead LS1 Hydrophone)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
ctd41cp_timestamp (sci_ctd41cp_timestamp, seconds since 1970-01-01T00:00:00Z)
... (42 more variables)


usf-murphy-20230609T1618 Delayed Mode Raw Time Series

Summary:
The Predictions of AcousticS with Smart Experimental Networks of GlidERS (PASSENGERS) project is a partnership between universities and the Naval Research Laboratory to improve the capability of data-assimilative ocean models to predict acoustic propagation in dynamic oceanography environments. It includes the deployment of teams of gliders in small (10 km) spatial footprints with integrated passive acoustics focused on mapping the physical and acoustic environment in the dynamic region of the Atlantis II Seamounts. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (usf-murphy Slocum G1)
instrument_ctd (SBE CT Sail)
instrument_hydrophone (Loggerhead LS1 Hydrophone)
c_air_pump (enum)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_profile_on (sec)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_air_pump (bool)
m_altitude (m)
m_appear_to_be_at_surface (bool)
... (40 more variables)


usf-murphy-20230609T1618 Delayed Mode Science Profiles

Summary:
The Predictions of AcousticS with Smart Experimental Networks of GlidERS (PASSENGERS) project is a partnership between universities and the Naval Research Laboratory to improve the capability of data-assimilative ocean models to predict acoustic propagation in dynamic oceanography environments. It includes the deployment of teams of gliders in small (10 km) spatial footprints with integrated passive acoustics focused on mapping the physical and acoustic environment in the dynamic region of the Atlantis II Seamounts. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (usf-murphy Slocum G1)
instrument_ctd (SBE CT Sail)
instrument_hydrophone (Loggerhead LS1 Hydrophone)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
ctd41cp_timestamp (sci_ctd41cp_timestamp, seconds since 1970-01-01T00:00:00Z)
... (42 more variables)


usf_murphy-20221104T1001 Delayed Mode Raw Time Series


usf_murphy-20221104T1001 Delayed Mode Science Profiles


uvi_01-20230921T1324 Delayed Mode Raw Time Series

Summary:
This project is focused on collecting upper ocean data ahead-of and during tropical cyclones to better understand ocean mixing and feedbacks on hurricane intensity. Glider deployments are intended to occur during the NOAA GOMO Integrated Field Campaign Coordinated Hurricane Atmosphere Ocean Sampling alongside other ocean observing assets such as Saildrones, air-deployed floats, uncrewed aerial vehicles, among others. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_ad2cp_on (sec)
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_appear_to_be_at_surface (bool)
m_coulomb_amphr (amp-hrs)
m_depth (Depth, m)
m_fin (rad)
... (45 more variables)

University of the Virgin Islands, Rutgers University


uvi_01-20230921T1324 Delayed Mode Science Profiles

Summary:
This project is focused on collecting upper ocean data ahead-of and during tropical cyclones to better understand ocean mixing and feedbacks on hurricane intensity. Glider deployments are intended to occur during the NOAA GOMO Integrated Field Campaign Coordinated Hurricane Atmosphere Ocean Sampling alongside other ocean observing assets such as Saildrones, air-deployed floats, uncrewed aerial vehicles, among others. This is a full-resolution delayed mode data set and contains oxygen and CTD profiles. The ADCP data is not included as we are currently developing processing methods.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
... (69 more variables)


uvi_01-20240809T1334 Real Time Raw Time Series

Summary:
PAM-equipped UVI gliders will be used for two approximately 35-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
f_fin_offset (rad)
f_ocean_pressure_max (volts)
... (88 more variables)


uvi_01-20240809T1334 Real Time Science Profiles

Summary:
PAM-equipped UVI gliders will be used for two approximately 35-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
density_qartod_climatology_test (Climatology Test Quality Flag)
density_qartod_flat_line_test (Flat Line Test Quality Flag)
density_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (52 more variables)


uvi_01-20240828T1337 Real Time Raw Time Series

Summary:
PAM-equipped UVI gliders will be used for four approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
f_fin_offset (rad)
f_ocean_pressure_max (volts)
... (91 more variables)


uvi_01-20240828T1337 Real Time Science Profiles

Summary:
PAM-equipped UVI gliders will be used for four approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
density_qartod_climatology_test (Climatology Test Quality Flag)
density_qartod_flat_line_test (Flat Line Test Quality Flag)
density_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (52 more variables)


uvi_01-20241004T1402 Real Time Raw Time Series

Summary:
PAM-equipped UVI gliders will be used for four approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.  This is mission 3 of 4, westward along the Northern coasts of the USVI and Puerto Rico.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
f_fin_offset (rad)
... (92 more variables)


uvi_01-20241004T1402 Real Time Science Profiles

Summary:
PAM-equipped UVI gliders will be used for four approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.  This is mission 3 of 4, westward along the Northern coasts of the USVI and Puerto Rico.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
density_qartod_climatology_test (Climatology Test Quality Flag)
density_qartod_flat_line_test (Flat Line Test Quality Flag)
... (53 more variables)


uvi_01-20241026T1158 Real Time Raw Time Series

Summary:
PAM-equipped UVI gliders will be used for four approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.  This is mission 4 of 4 for the Fall 2024 USVI-PR deployment, Eastward along the Northern coasts of the Puerto Rico and the USVI. This mission is a return trip to St. Thomas, USVI.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (93 more variables)


uvi_01-20241026T1158 Real Time Science Profiles

Summary:
PAM-equipped UVI gliders will be used for four approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.  This is mission 4 of 4 for the Fall 2024 USVI-PR deployment, Eastward along the Northern coasts of the Puerto Rico and the USVI. This mission is a return trip to St. Thomas, USVI.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
density_qartod_climatology_test (Climatology Test Quality Flag)
... (54 more variables)


uvi_01-20250318T2008 Real Time Raw Time Series

Summary:
PAM-equipped UVI glider will be used for an approximately 20-day mission in USVI to collect Passive Acoustic data for marine mammal assessment.  This is mission 7 of the current cetacean monitoring project, a USVI deployment, to be sent south of St. Thomas and St. John to St. Croix and then returning to the south shelf of St. Thomas and St. John.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (93 more variables)


uvi_01-20250318T2008 Real Time Science Profiles

Summary:
PAM-equipped UVI glider will be used for an approximately 20-day mission in USVI to collect Passive Acoustic data for marine mammal assessment.  This is mission 7 of the current cetacean monitoring project, a USVI deployment, to be sent south of St. Thomas and St. John to St. Croix and then returning to the south shelf of St. Thomas and St. John.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
density_qartod_climatology_test (Climatology Test Quality Flag)
... (54 more variables)


uvi_01-20251106T1338 Real Time Raw Time Series

Summary:
This deployment is a test mission in preparation for a trans-Caribbean mission.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
f_fin_offset (rad)
f_ocean_pressure_max (volts)
... (92 more variables)


uvi_01-20251106T1338 Real Time Science Profiles

Summary:
This deployment is a test mission in preparation for a trans-Caribbean mission.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_01 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
density_qartod_climatology_test (Climatology Test Quality Flag)
density_qartod_flat_line_test (Flat Line Test Quality Flag)
density_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (54 more variables)


uvi_02-20231102T1447 Delayed Mode Raw Time Series

Summary:
This project is focused on collecting upper ocean data ahead-of and during tropical cyclones to better understand ocean mixing and feedbacks on hurricane intensity. Glider deployments are intended to occur during the NOAA GOMO Integrated Field Campaign Coordinated Hurricane Atmosphere Ocean Sampling alongside other ocean observing assets such as Saildrones, air-deployed floats, uncrewed aerial vehicles, among others. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_02 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_ad2cp_on (sec)
c_fin (rad)
c_heading (rad)
c_oxy4_num_fields_to_send (nodim)
c_oxy4_on (sec)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_appear_to_be_at_surface (bool)
m_coulomb_amphr (amp-hrs)
... (48 more variables)


uvi_02-20231102T1447 Delayed Mode Science Profiles

Summary:
This project is focused on collecting upper ocean data ahead-of and during tropical cyclones to better understand ocean mixing and feedbacks on hurricane intensity. Glider deployments are intended to occur during the NOAA GOMO Integrated Field Campaign Coordinated Hurricane Atmosphere Ocean Sampling alongside other ocean observing assets such as Saildrones, air-deployed floats, uncrewed aerial vehicles, among others. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_02 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
... (68 more variables)


uvi_02-20241105T1313 Real Time Raw Time Series

Summary:
A one-week mission to the Grammanik Bank area south of St. Thomas USVI to observe oceanic drivers of mesophotic coral reef environmental condition, collecting Temperature, Salinity, Dissolved Oxygen, and optical (Chlorophyll, Turbidity, and CDOM) data. The ECO puck is externally mounted so no data flow through glider.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_02 Slocum G3S)
instrument_bb3slo (WET Labs ECO BB3SLO)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
... (92 more variables)


uvi_02-20241105T1313 Real Time Science Profiles

Summary:
A one-week mission to the Grammanik Bank area south of St. Thomas USVI to observe oceanic drivers of mesophotic coral reef environmental condition, collecting Temperature, Salinity, Dissolved Oxygen, and optical (Chlorophyll, Turbidity, and CDOM) data. The ECO puck is externally mounted so no data flow through glider.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_02 Slocum G3S)
instrument_bb3slo (WET Labs ECO BB3SLO)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
... (53 more variables)


uvi_02-20250211T1347 Real Time Raw Time Series

Summary:
PAM-equipped UVI gliders will be used for multiple approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.  This is mission 5 of the current cetacean monitoring project, a USVI deployment, Eastward in a geographically v-shaped time series along the south shelf of St. Thomas, near the BVI EEZ.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_02 Slocum G3S)
instrument_bb3slo (WET Labs ECO BB3SLO)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
... (92 more variables)


uvi_02-20250211T1347 Real Time Science Profiles

Summary:
PAM-equipped UVI gliders will be used for multiple approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.  This is mission 5 of the current cetacean monitoring project, a USVI deployment, Eastward in a geographically v-shaped time series along the south shelf of St. Thomas, near the BVI EEZ.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degrees_north)
profile_lon (Profile Center Longitude, degrees_east)
source_file (Source data file)
platform (uvi_02 Slocum G3S)
instrument_bb3slo (WET Labs ECO BB3SLO)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
... (53 more variables)


uvi_02-20250306T1911 Real Time Raw Time Series

Summary:
PAM-equipped UVI gliders will be used for multiple approximately 20-day missions in USVI and Puerto Rico to collect Passive Acoustic data for marine mammal assessment.  This is mission 6 of the current cetacean monitoring project, a USVI deployment, to be sent south of St. Thomas and St. John to St. Croix, around St. Croix, then returning back to the south shelf of St. Thomas and St. John.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (uvi_02 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
c_wpt_lat (lat)
c_wpt_lon (lon)
c_wpt_x_lmc (m)
c_wpt_y_lmc (m)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (91 more variables)