ru34-20200729T1430 Delayed Mode Raw Time Series

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and performed zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_optode (Oxygen Optode)
instrument_vmt (Vemco Rx-Live Mobile Tranceiver)
c_ctd41cp_num_fields_to_send (nodim)
c_dmon_on (sec)
c_fin (rad)
c_heading (rad)
c_oxy3835_num_fields_to_send (nodim)
... (58 more variables)


ru34-20200729T1430 Delayed Mode Science Profiles

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and performed zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_optode (Oxygen Optode)
instrument_vmt (Vemco Rx-Live Mobile Tranceiver)
conductivity (Raw Conductivity, S m-1)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (33 more variables)


ru34-20201003T1821 Delayed Mode Raw Time Series


ru34-20201003T1821 Delayed Mode Science Profiles

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_optode (Oxygen Optode)
instrument_vmt (Vemco Rx-Live Mobile Tranceiver)
conductivity (Raw Conductivity, S m-1)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (33 more variables)


ru34-20201119T1533 Delayed Mode Raw Time Series

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This real-time dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. This is a full resolution delayed-mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_optode (Oxygen Optode)
instrument_vmt (Vemco Rx-Live Mobile Tranceiver)
c_ctd41cp_num_fields_to_send (nodim)
c_dmon_on (sec)
c_fin (rad)
c_heading (rad)
c_oxy3835_num_fields_to_send (nodim)
... (85 more variables)


ru34-20201119T1533 Delayed Mode Science Profiles

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This real-time dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_optode (Oxygen Optode)
instrument_vmt (Vemco Rx-Live Mobile Tranceiver)
conductivity (Raw Conductivity, S m-1)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (33 more variables)


ru34-20210208T2055 Delayed Mode Raw Time Series

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and performed zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_optode (Oxygen Optode)
instrument_vmt (Vemco Rx-Live Mobile Tranceiver)
c_ctd41cp2_num_fields_to_send (nodim)
c_ctd41cp2_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_dmon_on (sec)
c_fin (rad)
... (60 more variables)


ru34-20210208T2055 Delayed Mode Science Profiles


ru34-20211120T1900 Delayed Mode Raw Time Series

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This real-time dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vmt (Vemco Rx-Live Mobile Tranceiver)
c_ctd41cp_num_fields_to_send (nodim)
c_dmon_on (sec)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (80 more variables)


ru34-20211120T1900 Delayed Mode Science Profiles

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This real-time dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vmt (Vemco Rx-Live Mobile Tranceiver)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (46 more variables)


ru34-20220113T1949 Delayed Mode Raw Time Series

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vemco (Vemco Rx-LIVE Cabled Receiver)
c_ctd41cp_num_fields_to_send (nodim)
c_dmon_on (sec)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (80 more variables)


ru34-20220113T1949 Delayed Mode Science Profiles

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vemco (Vemco Rx-LIVE Cabled Receiver)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (76 more variables)


ru34-20220215T1926 Delayed Mode Raw Time Series

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vemco (Vemco Rx-LIVE Cabled Receiver)
c_ctd41cp_num_fields_to_send (nodim)
c_dmon_on (sec)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (80 more variables)


ru34-20220215T1926 Delayed Mode Science Profiles


ru34-20220330T1435 Delayed Mode Raw Time Series

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This real-time dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vemco (Vemco Rx-LIVE Cabled Receiver)
c_ctd41cp_num_fields_to_send (nodim)
c_dmon_on (sec)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (80 more variables)


ru34-20220330T1435 Delayed Mode Science Profiles

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This real-time dataset contains temperature, salinity and oxygen concentration measurements.  Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vemco (Vemco Rx-LIVE Cabled Receiver)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (80 more variables)


ru34-20220520T1538 Delayed Mode Raw Time Series

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements. Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vemco (Vemco Rx-LIVE Cabled Receiver)
c_ctd41cp_num_fields_to_send (nodim)
c_dmon_on (sec)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (80 more variables)


ru34-20220520T1538 Delayed Mode Science Profiles

Summary:
This glider mission will serve as an integral component of Ørsted’s Ecosystem and Passive Acoustic Monitoring (ECO-PAM) project, which will help advance research for detection of North Atlantic right whale, to better understand their presence, distribution and seasonality and to contribute to characterization of their habitat in offshore wind lease areas. Additional benefits of the glider mission include collection of tagged fish data disseminated thru the Animal Telemetry Network as well as contribution of data gathered to the NOAA IOOS Glider DAC that will help improve accuracy of weather forecasting and predicting severe storms. The ECO-PAM project is in partnership with the University of Rhode Island, Woods Hole Oceanographic Institution and Rutgers, The State University of New Jersey. This dataset contains temperature, salinity and oxygen concentration measurements. Acoustic monitoring data will be packaged separately and is not included in this dataset. The glider was deployed southeast of Atlantic City and will perform zig-zag transects south along the coast of New Jersey. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_dmon (DMON)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_optode (Oxygen Optode)
instrument_vemco (Vemco Rx-LIVE Cabled Receiver)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (80 more variables)


ru34-20230303T1521 Delayed Mode Raw Time Series

Summary:
This project uses glider-based passive acoustic monitoring to determine the presence/absence of spawning cod within in the immediate footprint of site preparation works in the South Fork Wind lease area and to use collected data to determine if an adaptive management strategy needs to be implemented. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_hydrophone (JASCO Ocean Observer Hydrophone)
instrument_optode (Oxygen Optode)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
c_flbbcd_on (sec)
c_heading (rad)
c_oxy4_num_fields_to_send (nodim)
c_oxy4_on (sec)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
... (66 more variables)


ru34-20230303T1521 Delayed Mode Science Profiles

Summary:
This project uses glider-based passive acoustic monitoring to determine the presence/absence of spawning cod within in the immediate footprint of site preparation works in the South Fork Wind lease area and to use collected data to determine if an adaptive management strategy needs to be implemented. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru34)
instrument_ctd (Conductivity, Temperature, Depth (CTD) Sensor)
instrument_flbbcdslc (ECO Triplet Puck)
instrument_hydrophone (JASCO Ocean Observer Hydrophone)
instrument_optode (Oxygen Optode)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
beta_700nm_reference (Beta 700nm Reference at 117 degrees, m-1 sr-1)
beta_700nm_signal (Beta 700nm Signal at 117 degrees, m-1 sr-1)
cdom (ppb)
cdom_reference (nodim)
cdom_signal (nodim)
chlorophyll_a (ug L-1)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
... (70 more variables)


ru34-20230920T1506 Delayed Mode Raw Time Series

Summary:
This project is conducting a 2-year baseline survey with a pair of gliders deployed in each season, and a 3rd glider deployed three times per year to fill coverage gaps in the seasonal glider deployments from the onset of seasonal stratification associated with the Cold Pool formation in the spring to the physical breakdown in the fall. This glider deployment is the second of three gap-fill missions this year. The gliders are integrated with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a CTD and pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa Optode for measuring dissolved oxygen, and an Rx-LIVE fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sandy Hook, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter, and dissolved oxygen measurements. pH data and acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_optode (AA Optode 4831)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_rxlive (Rx-LIVE Cabled Receiver)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
... (83 more variables)


ru34-20230920T1506 Delayed Mode Science Profiles

Summary:
This project is conducting a 2-year baseline survey with a pair of gliders deployed in each season, and a 3rd glider deployed three times per year to fill coverage gaps in the seasonal glider deployments from the onset of seasonal stratification associated with the Cold Pool formation in the spring to the physical breakdown in the fall. This glider deployment is the second of three gap-fill missions this year. The gliders are integrated with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a CTD and pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa Optode for measuring dissolved oxygen, and an Rx-LIVE fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sandy Hook, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter, and dissolved oxygen measurements. pH data and acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_optode (AA Optode 4831)
instrument_pH (Deep ISFET Glider-based pH Sensor)
... (97 more variables)


ru34-20240112T1722 Delayed Mode Raw Time Series

Summary:
This project is using a JASCO OceanObserver hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind offshore wind lease area during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa optode for measuring dissolved oxygen, and a VEMCO receiver. This is the first of two sequential deployments planned to monitor the wind lease area for three months during cod spawning season. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_hydrophone (JASCO OceanObserver acoustic monitoring system)
instrument_optode (AA Optode 3835)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
c_flbbcd_on (sec)
c_heading (rad)
c_oxy3835_num_fields_to_send (nodim)
c_oxy3835_on (sec)
... (73 more variables)


ru34-20240112T1722 Delayed Mode Science Profiles

Summary:
This project is using a JASCO OceanObserver hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind offshore wind lease area during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa optode for measuring dissolved oxygen, and a VEMCO receiver. This is the first of two sequential deployments planned to monitor the wind lease area for three months during cod spawning season. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_hydrophone (JASCO OceanObserver acoustic monitoring system)
instrument_optode (AA Optode 3835)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
beta_700nm_reference (Beta 700nm Reference at 117 degrees, m-1 sr-1)
beta_700nm_signal (Beta 700nm Signal at 117 degrees, m-1 sr-1)
cdom (ppb)
... (85 more variables)


ru34-20240112T1722 Real Time Science Profiles

Summary:
This project is using a JASCO OceanObserver hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind offshore wind lease area during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa optode for measuring dissolved oxygen, and a VEMCO receiver. This is the first of two sequential deployments planned to monitor the wind lease area for three months during cod spawning season.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_hydrophone (JASCO OceanObserver acoustic monitoring system)
instrument_optode (AA Optode 3835)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
cdom (ppb)
chlorophyll_a (ug L-1)
chlorophyll_a_qartod_gross_range_test (Gross Range Test Quality Flag)
... (65 more variables)


ru34-20240301T1336 Delayed Mode Raw Time Series

Summary:
This project is using a JASCO OceanObserver hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind offshore wind lease area during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa optode for measuring dissolved oxygen, and a VEMCO receiver. This is the second of two sequential deployments planned to monitor the wind lease area for three months during cod spawning season. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_hydrophone (JASCO OceanObserver acoustic monitoring system)
instrument_optode (AA Optode 3835)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
c_flbbcd_on (sec)
c_heading (rad)
c_oxy3835_num_fields_to_send (nodim)
c_oxy3835_on (sec)
... (74 more variables)


ru34-20240301T1336 Delayed Mode Science Profiles

Summary:
This project is using a JASCO OceanObserver hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind offshore wind lease area during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa optode for measuring dissolved oxygen, and a VEMCO receiver. This is the second of two sequential deployments planned to monitor the wind lease area for three months during cod spawning season. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_hydrophone (JASCO OceanObserver acoustic monitoring system)
instrument_optode (AA Optode 3835)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
beta_700nm_reference (Beta 700nm Reference at 117 degrees, m-1 sr-1)
beta_700nm_signal (Beta 700nm Signal at 117 degrees, m-1 sr-1)
cdom (ppb)
... (85 more variables)


ru34-20240301T1336 Real Time Science Profiles

Summary:
This project is using a JASCO OceanObserver hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind offshore wind lease area during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa optode for measuring dissolved oxygen, and a VEMCO receiver. This is the second of two sequential deployments planned to monitor the wind lease area for three months during cod spawning season.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_hydrophone (JASCO OceanObserver acoustic monitoring system)
instrument_optode (AA Optode 3835)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
cdom (ppb)
chlorophyll_a (ug L-1)
chlorophyll_a_qartod_gross_range_test (Gross Range Test Quality Flag)
... (62 more variables)


ru34-20241102T1737 Real Time Raw Time Series

Summary:
This project is using a JASCO OceanObserver hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind and Sunrise Wind offshore wind lease areas during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa optode for measuring dissolved oxygen, and a VEMCO receiver. This is the first of three sequential deployments planned to monitor the wind lease area for five months during cod spawning season, November through March.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_hydrophone (JASCO OceanObserver acoustic monitoring system)
instrument_optode (AA Optode 3835)
instrument_rxlive (Rx-LIVE Cabled Receiver)
c_alt_time
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all
... (100 more variables)


ru34-20241102T1737 Real Time Science Profiles

Summary:
This project is using a JASCO OceanObserver hydrophone attached to a glider to monitor and understand the spatial and temporal distribution of spawning cod aggregations in the Revolution Wind and Sunrise Wind offshore wind lease areas during the spawning season. These glider-based observations are occurring during construction activities that may include seabed preparation along cable routes and placement of scour protection at the foundation locations. The glider is also equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa optode for measuring dissolved oxygen, and a VEMCO receiver. This is the first of three sequential deployments planned to monitor the wind lease area for five months during cod spawning season, November through March.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru34 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_hydrophone (JASCO OceanObserver acoustic monitoring system)
instrument_optode (AA Optode 3835)
instrument_rxlive (Rx-LIVE Cabled Receiver)
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
cdom (ppb)
chlorophyll_a (ug L-1)
chlorophyll_a_qartod_gross_range_test (Gross Range Test Quality Flag)
... (65 more variables)


ru36-20220223T1807 Delayed Mode Raw Time Series

Summary:
This project is focused on collecting data for onboard glider processing from an Acoustic Doppler Current Profiler (ADCP). This is specifically targeted at collecting data down to 1000 meters for development of onboard processing algorithms in a bench-top processor environment. Future deployments will include integrated processors carrying out onboard processing at sea. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru36)
instrument_adcp (ADCP)
instrument_ctd_rbr (RBR CTD)
instrument_optode (Oxygen Optode)
c_air_pump (enum)
c_ballast_pumped (cc)
c_battpos (in)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_dvl_on (sec)
c_fin (rad)
c_heading (rad)
c_oxy4_num_fields_to_send (nodim)
c_oxy4_on (sec)
c_pitch (rad)
c_roll (rad)
... (147 more variables)


ru36-20220223T1807 Delayed Mode Science Profiles

Summary:
This project is focused on collecting data for onboard glider processing from an Acoustic Doppler Current Profiler (ADCP). This is specifically targeted at collecting data down to 1000 meters for development of onboard processing algorithms in a bench-top processor environment. Future deployments will include integrated processors carrying out onboard processing at sea. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru36)
instrument_adcp (ADCP)
instrument_ctd_rbr (RBR CTD)
instrument_optode (Oxygen Optode)
conductivity
conductivity_hysteresis_test
conductivity_qartod_climatology_test
conductivity_qartod_flat_line_test
conductivity_qartod_gross_range_test
conductivity_qartod_rate_of_change_test
conductivity_qartod_spike_test
conductivity_qartod_summary_flag
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density
... (104 more variables)


ru36-20220413T2107 Delayed Mode Raw Time Series

Summary:
This project is focused on collecting data for onboard glider processing from an Acoustic Doppler Current Profiler (ADCP). This is specifically targeted at collecting data down to 1000 meters for development of onboard processing algorithms in a bench-top processor environment. Future deployments will include integrated processors carrying out onboard processing at sea. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru36)
instrument_adcp (ADCP)
instrument_ctd_rbr (RBR CTD)
instrument_optode (Oxygen Optode)
c_dvl_on (sec)
c_fin (rad)
c_heading (rad)
c_oxy4_num_fields_to_send (nodim)
c_oxy4_on (sec)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_appear_to_be_at_surface (bool)
m_coulomb_amphr (amp-hrs)
... (98 more variables)


ru36-20220413T2107 Delayed Mode Science Profiles

Summary:
This project is focused on collecting data for onboard glider processing from an Acoustic Doppler Current Profiler (ADCP). This is specifically targeted at collecting data down to 1000 meters for development of onboard processing algorithms in a bench-top processor environment. Future deployments will include integrated processors carrying out onboard processing at sea. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru36)
instrument_adcp (ADCP)
instrument_ctd_rbr (RBR CTD)
instrument_optode (Oxygen Optode)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
density (kg m-3)
... (100 more variables)


ru36-20221102T1157 Delayed Mode Raw Time Series

Summary:
The Predictions of AcousticS with Smart Experimental Networks of GlidERS (PASSENGERS) project is a partnership between universities and the Naval Research Laboratory to improve the capability of data-assimilative ocean models to predict acoustic propagation in dynamic oceanography environments. It includes the deployment of teams of gliders in small (10 km) spatial footprints with integrated passive acoustics focused on mapping the physical and acoustic environment in the dynamic region of the Atlantis II Seamounts. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru36)
instrument_adcp (ADCP)
instrument_ctd_rbr (RBR CTD)
instrument_hydrophone (Loggerhead LS1 Hydrophone)
c_dvl_on (sec)
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_appear_to_be_at_surface (bool)
m_coulomb_amphr (amp-hrs)
m_depth (Depth, m)
... (84 more variables)


ru36-20221102T1157 Delayed Mode Science Profiles

Summary:
The Predictions of AcousticS with Smart Experimental Networks of GlidERS (PASSENGERS) project is a partnership between universities and the Naval Research Laboratory to improve the capability of data-assimilative ocean models to predict acoustic propagation in dynamic oceanography environments. It includes the deployment of teams of gliders in small (10 km) spatial footprints with integrated passive acoustics focused on mapping the physical and acoustic environment in the dynamic region of the Atlantis II Seamounts. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (Slocum Glider ru36)
instrument_adcp (ADCP)
instrument_ctd_rbr (RBR CTD)
instrument_hydrophone (Loggerhead LS1 Hydrophone)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (89 more variables)


ru36-20230525T1748 Delayed Mode Raw Time Series

Summary:
The Predictions of AcousticS with Smart Experimental Networks of GlidERS (PASSENGERS) project is a partnership between universities and the Naval Research Laboratory to improve the capability of data-assimilative ocean models to predict acoustic propagation in dynamic oceanography environments. It includes the deployment of teams of gliders in small (10 km) spatial footprints with integrated passive acoustics focused on mapping the physical and acoustic environment in the dynamic region of the Atlantis II Seamounts. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru36 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_hydrophone (Loggerhead LS1 Hydrophone)
instrument_rbrctd (RBR Legato3 CTD)
c_ad2cp_on (sec)
c_air_pump (enum)
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_profile_on (sec)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_air_pump (bool)
m_altitude (m)
... (44 more variables)


ru36-20230525T1748 Delayed Mode Science Profiles

Summary:
The Predictions of AcousticS with Smart Experimental Networks of GlidERS (PASSENGERS) project is a partnership between universities and the Naval Research Laboratory to improve the capability of data-assimilative ocean models to predict acoustic propagation in dynamic oceanography environments. It includes the deployment of teams of gliders in small (10 km) spatial footprints with integrated passive acoustics focused on mapping the physical and acoustic environment in the dynamic region of the Atlantis II Seamounts. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru36 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_hydrophone (Loggerhead LS1 Hydrophone)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
... (46 more variables)


ru36-20230611T2254 Delayed Mode Raw Time Series


ru36-20230611T2254 Delayed Mode Science Profiles


ru36-20240821T1852 Real Time Raw Time Series

Summary:
The Challenger Glider Mission is a re-creation of the first global scientific ocean survey conducted by the HMS Challenger from 1872-1876. The goals of the mission are to establish a collaborative international network of autonomous underwater glider ports, to assess global ocean model predictive skill while contributing real-time profile data for assimilation in ocean forecast models by operational centers worldwide, and to crowd source student-based ocean research and discovery. This glider is providing dissolved oxygen, temperature, conductivity, salinity, and density profile observations, as well as monitoring the passive acoustic environment in the vicinity of Martinique.  Real-time datasets will include CTD data that will be provided to the IOOS Glider DAC and GTS to support ocean and atmospheric weather forecasting.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru36 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
c_alt_time (sec)
c_climb_target_depth (m)
c_de_oil_vol (cc)
c_dive_target_depth (m)
c_fin (rad)
c_heading (rad)
c_science_send_all (bool)
c_thruster_on (%)
c_weight_drop (bool)
... (98 more variables)


ru36-20240821T1852 Real Time Science Profiles

Summary:
The Challenger Glider Mission is a re-creation of the first global scientific ocean survey conducted by the HMS Challenger from 1872-1876. The goals of the mission are to establish a collaborative international network of autonomous underwater glider ports, to assess global ocean model predictive skill while contributing real-time profile data for assimilation in ocean forecast models by operational centers worldwide, and to crowd source student-based ocean research and discovery. This glider is providing dissolved oxygen, temperature, conductivity, salinity, and density profile observations, as well as monitoring the passive acoustic environment in the vicinity of Martinique.  Real-time datasets will include CTD data that will be provided to the IOOS Glider DAC and GTS to support ocean and atmospheric weather forecasting.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru36 Slocum G3S)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_optode (AA Optode 4831)
instrument_rbrctd (RBR Legato3 CTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
... (59 more variables)


ru38-20230420T1602 Delayed Mode Raw Time Series

Summary:
Sea Water Ocean Topography (SWOT) is a radar interferometry mission making SSH measurements over a swath 120 km wide. There is a nadir gap of 20 km where the error from interferometry is not meeting science requirement. The mission's calval requirement is to validate the along-track SSH performance in terms of a wavenumber spectrum of the measurement error by comparison to in-situ measurement.  The current candidate for the in-situ measurement is an array of gliders along the center of a swath to resolve the dynamic height at wavelengths of 15-150 km. An OSSE study suggests that a station-keeping glider making vertical loop of the upper 500 m of the water column in 2 hours can meet the requirement of providing quasi-synoptic observations of the dynamic height from the glider array for comparison with the SWOT snapshot measurement of SSH from overflight.  The primary objective of the Monterey bay experiment is to test the capability of gliders to retrieve the upper ocean dynamic height time series derived from the M1 moo ring covering the upper 300 m of the water column.  Another objective is to make simultaneous measurement of the SSH via a GPS buoy and the bottom pressure via a bottom-pressure recorder. These measurements will allow us to derive the steric component of SSH and compare to the hydrographic measurement by the mooring and gliders.  The glider was deployed in the Monterey Bay National Marine Sanctuary and will traverse west southwest to a series of moorings arranged from north to south over a distance of KM km. This dataset contains Conductivity, Temperature and Depth (CTD) measurements. The data will be released on the Global Telecommunication System. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru38 Slocum G3)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
... (41 more variables)

Rutgers University,California Institute of Technology Jet Propulsion Laboratory


ru38-20230420T1602 Delayed Mode Science Profiles

Summary:
Sea Water Ocean Topography (SWOT) is a radar interferometry mission making SSH measurements over a swath 120 km wide. There is a nadir gap of 20 km where the error from interferometry is not meeting science requirement. The mission's calval requirement is to validate the along-track SSH performance in terms of a wavenumber spectrum of the measurement error by comparison to in-situ measurement.  The current candidate for the in-situ measurement is an array of gliders along the center of a swath to resolve the dynamic height at wavelengths of 15-150 km. An OSSE study suggests that a station-keeping glider making vertical loop of the upper 500 m of the water column in 2 hours can meet the requirement of providing quasi-synoptic observations of the dynamic height from the glider array for comparison with the SWOT snapshot measurement of SSH from overflight.  The primary objective of the Monterey bay experiment is to test the capability of gliders to retrieve the upper ocean dynamic height time series derived from the M1 moo ring covering the upper 300 m of the water column.  Another objective is to make simultaneous measurement of the SSH via a GPS buoy and the bottom pressure via a bottom-pressure recorder. These measurements will allow us to derive the steric component of SSH and compare to the hydrographic measurement by the mooring and gliders.  The glider was deployed in the Monterey Bay National Marine Sanctuary and will traverse west southwest to a series of moorings arranged from north to south over a distance of KM km. This dataset contains Conductivity, Temperature and Depth (CTD) measurements. The data will be released on the Global Telecommunication System. Delayed mode dataset. Includes adjusted values for conductivity, salinity, and density using conductivity scaled by 1.0004629 based on analysis by Matthias Lankhorst (UCSD). The scaling factor was derived from salinity mismatches (on isotherms) between glider data and the 600 and 800 dbar instruments on the moorings S2, S3, and S4, mostly from the May/June 2023 time period.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
... (60 more variables)


ru38-20240128T1523 Delayed Mode Raw Time Series

Summary:
These glider deployments are part of a multi-institution collaborative effort carried out to study the processes in the western Caribbean Sea and Yucatan Straits, which influence the Loop Current variability and Loop Current Eddy detachment. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru38 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
c_ad2cp_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_heading (rad)
c_pitch (rad)
c_roll (rad)
c_wpt_lat (lat)
c_wpt_lon (lon)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
m_altitude (m)
m_appear_to_be_at_surface (bool)
m_coulomb_amphr (amp-hrs)
m_depth (Depth, m)
m_fin (rad)
m_final_water_vx (m s-1)
m_final_water_vy (m s-1)
... (34 more variables)


ru38-20240128T1523 Delayed Mode Science Profiles

Summary:
These glider deployments are part of a multi-institution collaborative effort carried out to study the processes in the western Caribbean Sea and Yucatan Straits, which influence the Loop Current variability and Loop Current Eddy detachment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru38 Slocum G3S)
instrument_adcp (Nortek Glider1000 AD2CP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
conductivity (Raw Conductivity, S m-1)
conductivity_hysteresis_test (Conductivity Hysteresis Test Quality Flag)
conductivity_qartod_climatology_test (Climatology Test Quality Flag)
conductivity_qartod_flat_line_test (Flat Line Test Quality Flag)
conductivity_qartod_gross_range_test (Gross Range Test Quality Flag)
conductivity_qartod_rate_of_change_test (Rate Of Change Test Quality Flag)
conductivity_qartod_spike_test (Spike Test Quality Flag)
conductivity_qartod_summary_flag (QARTOD Summary Quality Flag)
crs (http://www.opengis.net/def/crs/EPSG/0/4326)
ctd41cp_timestamp (sci_ctd41cp_timestamp, seconds since 1970-01-01T00:00:00Z)
density (kg m-3)
density_qartod_climatology_test (Climatology Test Quality Flag)
density_qartod_flat_line_test (Flat Line Test Quality Flag)
... (44 more variables)


ru39-20230420T1636 Delayed Mode Raw Time Series

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for zooplankton: 125, 200, 455, 769 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This deployment out of Sandy Hook, New Jersey ran a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. pH data and acoustically-derived data will be processed separately. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (Slocum Glider ru39)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_azfp_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (71 more variables)


ru39-20230817T1520 Delayed Mode Raw Time Series

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for fish using 38, 120, and 200 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sandy Hook, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. pH data and acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_azfp_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (71 more variables)


ru39-20230817T1520 Delayed Mode Science Profiles

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for fish using 38, 120, and 200 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sandy Hook, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. pH data and acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (76 more variables)


ru39-20231018T1426 Real Time Raw Time Series

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for fish using 38, 120, and 200 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sandy Hook, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. pH data and acoustically-derived data will be processed post-deployment.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
... (108 more variables)


ru39-20231018T1426 Real Time Science Profiles

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for fish using 38, 120, and 200 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sandy Hook, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. pH data and acoustically-derived data will be processed post-deployment.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (65 more variables)


ru39-20231103T1413 Delayed Mode Raw Time Series

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for zooplankton using 120, 200, 455 and 769 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Manasquan, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. pH data and acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_azfp_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (71 more variables)


ru39-20231103T1413 Delayed Mode Science Profiles

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for zooplankton using 120, 200, 455 and 769 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Manasquan, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements. pH data and acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (76 more variables)


ru39-20240215T1646 Delayed Mode Raw Time Series

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for zooplankton using 120, 200, 455 and 769 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Manasquan, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter and pH measurements. Acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_azfp_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (71 more variables)


ru39-20240215T1646 Delayed Mode Science Profiles

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for zooplankton using 120, 200, 455 and 769 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Manasquan, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter and pH measurements. Acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (78 more variables)


ru39-20240429T1522 Delayed Mode Raw Time Series

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for zooplankton using 120, 200, 455 and 769 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Manasquan, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements, and pH measurements. Acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_azfp_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (72 more variables)


ru39-20240429T1522 Delayed Mode Science Profiles

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for zooplankton using 120, 200, 455 and 769 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Manasquan, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM and optical backscatter measurements, and pH measurements. Acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (78 more variables)


ru39-20240723T1442 Delayed Mode Raw Time Series

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for fish using 38, 120, and 200 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sayreville, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter, and pH measurements. Acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_azfp_on (sec)
c_ctd41cp_num_fields_to_send (nodim)
c_fin (rad)
c_flbbcd_num_fields_to_send (nodim)
... (74 more variables)


ru39-20240723T1442 Delayed Mode Science Profiles

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for fish using 38, 120, and 200 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sayreville, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter, and pH measurements. Acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
beta_700nm (Beta 700nm at 117 degrees, m-1 sr-1)
... (80 more variables)


ru39-20240723T1442 Real Time Raw Time Series

Summary:
This project is conducting a seasonal baseline survey with a pair of gliders deployed in each season over two years with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a coupled CTD/pH sensor, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Acoustic Zooplankton Fish Profiler (AZFP) multi-frequency echo sounder for active acoustic detection of pelagic organisms (transducers configured for fish using 38, 120, and 200 kHz), and a Vemco VMT fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sayreville, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter, and pH measurements. Acoustically-derived data will be processed post-deployment.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru39 Slocum G3S)
instrument_azfp (ASL AZFP)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_pH (Deep ISFET Glider-based pH Sensor)
instrument_vmt (Vemco Mobile Transceiver (VMT))
c_alt_time (sec)
c_ballast_pumped (cc)
c_climb_target_depth (m)
c_dive_target_depth (m)
... (106 more variables)


ru39-20241021T1717 Delayed Mode Raw Time Series


ru39-20241021T1717 Delayed Mode Science Profiles


ru40-20230629T1430 Delayed Mode Raw Time Series

Summary:
This project is conducting a 2-year baseline survey with a pair of gliders deployed in each season, and a 3rd glider deployed three times per year to fill coverage gaps in the seasonal glider deployments from the onset of seasonal stratification associated with the Cold Pool formation in the spring to the physical breakdown in the fall. This glider deployment is the first of three gap-fill missions this year. The gliders are integrated with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa Optode for measuring dissolved oxygen, a DMON passive acoustic sensor for the detection of marine mammals, and an Rx-LIVE fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sandy Hook, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter, and dissolved oxygen measurements. The display of baleen whale occurrence information will be available in near real-time on the Robots4Whales website (http://robots4whales.whoi.edu). Vemco acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = Trajectory
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
source_file (Source data file)
platform (ru40 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
instrument_flbbcdslc (ECO Puck Triplet FLBBCD-SLC)
instrument_optode (AA Optode 4831)
instrument_rxlive (Rx-LIVE Cabled Receiver)
... (83 more variables)


ru40-20230629T1430 Delayed Mode Science Profiles

Summary:
This project is conducting a 2-year baseline survey with a pair of gliders deployed in each season, and a 3rd glider deployed three times per year to fill coverage gaps in the seasonal glider deployments from the onset of seasonal stratification associated with the Cold Pool formation in the spring to the physical breakdown in the fall. This glider deployment is the first of three gap-fill missions this year. The gliders are integrated with a full complement of available sensors to simultaneously map oceanographic and ecological variables. This glider is equipped with a CTD, a WETLabs FLBBCD ECO puck configured for simultaneous chlorophyll fluorescence and optical backscatter measurements, an Aanderaa Optode for measuring dissolved oxygen, a DMON passive acoustic sensor for the detection of marine mammals, and an Rx-LIVE fish telemetry receiver to track tagged species moving through the region. This approximately 21- to 30-day deployment out of Sandy Hook, New Jersey will run a zig-zag transect along the coast of New Jersey, in and around current and planned offshore wind lease areas, with a planned recovery out of Tuckerton, New Jersey. The real-time dataset contains CTD, chlorophyll a, CDOM, optical backscatter, and dissolved oxygen measurements. The display of baleen whale occurrence information will be available in near real-time on the Robots4Whales website (http://robots4whales.whoi.edu). Vemco acoustically-derived data will be processed post-deployment. Delayed mode dataset.

cdm_data_type = TrajectoryProfile
VARIABLES:
time (m_present_time, seconds since 1970-01-01T00:00:00Z)
latitude (degrees_north)
longitude (degrees_east)
depth (CTD Depth, m)
trajectory (Trajectory/Deployment Name)
profile_id
profile_lat (Profile Center Latitude, degree_north)
profile_lon (Profile Center Longitude, degree_east)
source_file (Source data file)
platform (ru40 Slocum G3S)
instrument_ctd (Sea-Bird Slocum Glider GPCTD)
instrument_dmon (WHOI Digital Acoustic Monitoring Instrument DMON)
... (91 more variables)